From willysr at sbopkg.org Sun Nov 1 16:23:09 2015 From: willysr at sbopkg.org (Willy Sudiarto Raharjo) Date: Sun, 1 Nov 2015 23:23:09 +0700 Subject: [sbopkg-users] gmane Message-ID: <56363C6D.9040500@sbopkg.org> Few days ago i submitted sbopkg-users to gmane interface and if everything works properly, it should be visible soon The following parameters are set for this mailing list: * Newsgroup name: gmane.linux.slackware.sbopkg * Mailing list address: sbopkg-users at sbopkg.org * The group is read-only * Address encryption is on * Spam detection is on * The list is described as: "sbopkg users mailing list" * News URL: news://news.gmane.org/gmane.linux.slackware.sbopkg * Web URL: http://dir.gmane.org/gmane.linux.slackware.sbopkg -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: From willysr at sbopkg.org Sun Nov 1 16:37:16 2015 From: willysr at sbopkg.org (Willy Sudiarto Raharjo) Date: Sun, 1 Nov 2015 23:37:16 +0700 Subject: [sbopkg-users] gmane In-Reply-To: <56363C6D.9040500@sbopkg.org> References: <56363C6D.9040500@sbopkg.org> Message-ID: <56363FBC.3060107@sbopkg.org> > Few days ago i submitted sbopkg-users to gmane interface and if > everything works properly, it should be visible soon > > The following parameters are set for this mailing list: > > * Newsgroup name: gmane.linux.slackware.sbopkg > * Mailing list address: sbopkg-users at sbopkg.org > * The group is read-only > * Address encryption is on > * Spam detection is on > * The list is described as: > "sbopkg users mailing list" > * News URL: news://news.gmane.org/gmane.linux.slackware.sbopkg > * Web URL: http://dir.gmane.org/gmane.linux.slackware.sbopkg OK Now it's visible on above links -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: From ryan.q at linux.com Sun Nov 1 16:27:00 2015 From: ryan.q at linux.com (Ryan P.C. McQuen) Date: Sun, 1 Nov 2015 08:27:00 -0800 Subject: [sbopkg-users] gmane In-Reply-To: <56363C6D.9040500@sbopkg.org> References: <56363C6D.9040500@sbopkg.org> Message-ID: >Few days ago i submitted sbopkg-users to gmane interface and if everything works properly, it should be visible soon Looking good! -- [ryanpcmcquen.org] -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Screenshot_2015-11-01-09-26-36.png Type: image/png Size: 330902 bytes Desc: not available URL: From nsjeyan at gmail.com Sat Nov 14 05:47:42 2015 From: nsjeyan at gmail.com (Subash Jeyan) Date: Sat, 14 Nov 2015 11:17:42 +0530 Subject: [sbopkg-users] opencv 3.0.0 compile error Message-ID: <20151114111742.6e17cbc8@gmail.com> hi, my name is subash, from chennai india. been on slackware since about 2003, on slackware-current now. just recently came across sbopkg and been using it for the last week or so. looks like a nice way to browse and install libraries/applications. thanks. i had opencv 2.4.x on my system but since the latest digikam needed opencv-3.0.0, was trying to compile that using sbopkg and i run into the following error: /usr/lib/gcc/i586-slackware-linux/4.9.3/../../../../i586-slackware-linux/bin/ld: warning: libhogweed.so.2, needed by /usr/lib/libavformat.so.56, not found (try using -rpath or -rpath-link) /usr/lib/gcc/i586-slackware-linux/4.9.3/../../../../i586-slackware-linux/bin/ld: warning: libgnutls.so.28, needed by /usr/lib/libavformat.so.56, not found (try using -rpath or -rpath-link) /usr/lib/libavformat.so.56: undefined reference to `gnutls_server_name_set at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_transport_set_ptr at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_record_recv at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_deinit at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_x509_system_trust at GNUTLS_3_0_0' /usr/lib/libavformat.so.56: undefined reference to `gnutls_global_deinit at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_handshake at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_x509_key_file at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_x509_trust_file at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_type_get at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_verify_flags at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_allocate_credentials at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_check_hostname at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_priority_set_direct at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_init at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_get_peers at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_record_send at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_bye at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_record_get_direction at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_free_credentials at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_strerror at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_credentials_set at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_deinit at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_verify_peers2 at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_init at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_global_init at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_import at GNUTLS_1_4' collect2: error: ld returned 1 exit status modules/core/CMakeFiles/opencv_perf_core.dir/build.make:806: recipe for target 'bin/opencv_perf_core' failed make[2]: *** [bin/opencv_perf_core] Error 1 make[2]: Leaving directory '/tmp/SBo/opencv-3.0.0/build' CMakeFiles/Makefile2:1873: recipe for target 'modules/core/CMakeFiles/opencv_perf_core.dir/all' failed make[1]: *** [modules/core/CMakeFiles/opencv_perf_core.dir/all] Error 2 make[1]: Leaving directory '/tmp/SBo/opencv-3.0.0/build' Makefile:149: recipe for target 'all' failed make: *** [all] Error 2 i do have the latest gnutls installed (compiled from source). any pointers will be helpful. thanks, subash From willysr at sbopkg.org Sat Nov 14 16:21:45 2015 From: willysr at sbopkg.org (Willy Sudiarto Raharjo) Date: Sat, 14 Nov 2015 23:21:45 +0700 Subject: [sbopkg-users] opencv 3.0.0 compile error In-Reply-To: <20151114111742.6e17cbc8@gmail.com> References: <20151114111742.6e17cbc8@gmail.com> Message-ID: <56475F99.1070002@sbopkg.org> > my name is subash, from chennai india. been on slackware since about > 2003, on slackware-current now. > > just recently came across sbopkg and been using it for the last week or > so. looks like a nice way to browse and install libraries/applications. > thanks. > > i had opencv 2.4.x on my system but since the latest digikam needed > opencv-3.0.0, was trying to compile that using sbopkg and i run into > the following error: > /usr/lib/gcc/i586-slackware-linux/4.9.3/../../../../i586-slackware-linux/bin/ld: > warning: libhogweed.so.2, needed by /usr/lib/libavformat.so.56, not > found (try using -rpath or > -rpath-link) /usr/lib/gcc/i586-slackware-linux/4.9.3/../../../../i586-slackware-linux/bin/ld: > warning: libgnutls.so.28, needed by /usr/lib/libavformat.so.56, not > found (try using -rpath or -rpath-link) /usr/lib/libavformat.so.56: > undefined reference to > `gnutls_server_name_set at GNUTLS_1_4' /usr/lib/libavformat.so.56: > undefined reference to > `gnutls_transport_set_ptr at GNUTLS_1_4' /usr/lib/libavformat.so.56: > undefined reference to > `gnutls_record_recv at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined > reference to `gnutls_deinit at GNUTLS_1_4' /usr/lib/libavformat.so.56: > undefined reference to > `gnutls_certificate_set_x509_system_trust at GNUTLS_3_0_0' /usr/lib/libavformat.so.56: > undefined reference to `gnutls_global_deinit at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_handshake at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_set_x509_key_file at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_set_x509_trust_file at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_type_get at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_set_verify_flags at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_allocate_credentials at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_x509_crt_check_hostname at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_priority_set_direct at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_init at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_get_peers at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_record_send at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_bye at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_record_get_direction at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_free_credentials at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_strerror at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_credentials_set at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_x509_crt_deinit at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_certificate_verify_peers2 at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_x509_crt_init at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_global_init at GNUTLS_1_4' > /usr/lib/libavformat.so.56: undefined reference to > `gnutls_x509_crt_import at GNUTLS_1_4' > collect2: error: ld returned 1 exit status > modules/core/CMakeFiles/opencv_perf_core.dir/build.make:806: recipe for > target 'bin/opencv_perf_core' failed > make[2]: *** [bin/opencv_perf_core] Error 1 > make[2]: Leaving directory '/tmp/SBo/opencv-3.0.0/build' > CMakeFiles/Makefile2:1873: recipe for target > 'modules/core/CMakeFiles/opencv_perf_core.dir/all' failed > make[1]: *** [modules/core/CMakeFiles/opencv_perf_core.dir/all] Error 2 > make[1]: Leaving directory '/tmp/SBo/opencv-3.0.0/build' > Makefile:149: recipe for target 'all' failed > make: *** [all] Error 2 > > i do have the latest gnutls installed (compiled from source). any > pointers will be helpful. thanks, subash Hi Have you tried to rebuild your ffmpeg? and secondly why would you built newer gnutls? That will complicate things as we can't reproduce your environment -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: From nsjeyan at gmail.com Sun Nov 15 03:58:45 2015 From: nsjeyan at gmail.com (Subash Jeyan) Date: Sun, 15 Nov 2015 09:28:45 +0530 Subject: [sbopkg-users] opencv 3.0.0 compile error In-Reply-To: <56475F99.1070002@sbopkg.org> References: <20151114111742.6e17cbc8@gmail.com> <56475F99.1070002@sbopkg.org> Message-ID: <20151115092845.0ba8358c@gmail.com> On Sat, 14 Nov 2015 23:21:45 +0700 Willy Sudiarto Raharjo wrote: > Have you tried to rebuild your ffmpeg? just did and that solved the opencv-3.0.0 compile problem. thanks! however, when building digikam-4.14 through sbopkg, i get the following error now: CMakeFiles/kipiplugin_removeredeyes.dir/detection/locators/haarclassifier/haarclassifierlocator.cpp.o: In function `KIPIRemoveRedEyesPlugin::HaarClassifierLocator::allocateBuffers()': haarclassifierlocator.cpp:(.text+0x3ea): undefined reference to `cvFillImage' haarclassifierlocator.cpp:(.text+0x3fe): undefined reference to `cvFillImage' CMakeFiles/kipiplugin_removeredeyes.dir/detection/locators/haarclassifier/haarclassifierlocator.cpp.o: In function `KIPIRemoveRedEyesPlugin::HaarClassifierLocator::findBlobs(_IplImage*, int)': haarclassifierlocator.cpp:(.text+0x809): undefined reference to `cvFillImage' collect2: error: ld returned 1 exit status extra/kipi-plugins/removeredeyes/CMakeFiles/kipiplugin_removeredeyes.dir/build.make:696: recipe for target 'lib/kipiplugin_removeredeyes.so' failed make[2]: *** [lib/kipiplugin_removeredeyes.so] Error 1 make[2]: Leaving directory '/tmp/SBo/digikam-4.14.0/build' CMakeFiles/Makefile2:4682: recipe for target 'extra/kipi-plugins/removeredeyes/CMakeFiles/kipiplugin_removeredeyes.dir/all' failed make[1]: *** [extra/kipi-plugins/removeredeyes/CMakeFiles/kipiplugin_removeredeyes.dir/all] Error 2 make[1]: Leaving directory '/tmp/SBo/digikam-4.14.0/build' Makefile:141: recipe for target 'all' failed make: *** [all] Error 2 again, appreciate any help/pointers. thanks and regards, subash From willysr at sbopkg.org Sun Nov 15 10:23:45 2015 From: willysr at sbopkg.org (Willy Sudiarto Raharjo) Date: Sun, 15 Nov 2015 17:23:45 +0700 Subject: [sbopkg-users] opencv 3.0.0 compile error In-Reply-To: <20151115092845.0ba8358c@gmail.com> References: <20151114111742.6e17cbc8@gmail.com> <56475F99.1070002@sbopkg.org> <20151115092845.0ba8358c@gmail.com> Message-ID: <56485D31.2070205@sbopkg.org> > however, when building digikam-4.14 through sbopkg, i get the following > error now: > > CMakeFiles/kipiplugin_removeredeyes.dir/detection/locators/haarclassifier/haarclassifierlocator.cpp.o: > In function > `KIPIRemoveRedEyesPlugin::HaarClassifierLocator::allocateBuffers()': > haarclassifierlocator.cpp:(.text+0x3ea): undefined reference to > `cvFillImage' haarclassifierlocator.cpp:(.text+0x3fe): undefined > reference to `cvFillImage' > CMakeFiles/kipiplugin_removeredeyes.dir/detection/locators/haarclassifier/haarclassifierlocator.cpp.o: > In function > `KIPIRemoveRedEyesPlugin::HaarClassifierLocator::findBlobs(_IplImage*, > int)': haarclassifierlocator.cpp:(.text+0x809): undefined reference to > `cvFillImage' collect2: error: ld returned 1 exit status > extra/kipi-plugins/removeredeyes/CMakeFiles/kipiplugin_removeredeyes.dir/build.make:696: > recipe for target 'lib/kipiplugin_removeredeyes.so' failed make[2]: *** > [lib/kipiplugin_removeredeyes.so] Error 1 make[2]: Leaving directory > '/tmp/SBo/digikam-4.14.0/build' CMakeFiles/Makefile2:4682: recipe for > target > 'extra/kipi-plugins/removeredeyes/CMakeFiles/kipiplugin_removeredeyes.dir/all' > failed make[1]: *** > [extra/kipi-plugins/removeredeyes/CMakeFiles/kipiplugin_removeredeyes.dir/all] > Error 2 make[1]: Leaving directory '/tmp/SBo/digikam-4.14.0/build' > Makefile:141: recipe for target 'all' failed make: *** [all] Error 2 > > > again, appreciate any help/pointers. thanks and regards, subash i would recompile opencv again after ffmpeg is being rebuilt opencv <-> ffmpeg is a circular dependency or even better, recompile all digikam's dependency using sqg -p digikam; sbopkg -i digikam -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: From nsjeyan at gmail.com Sun Nov 15 13:52:49 2015 From: nsjeyan at gmail.com (Subash Jeyan) Date: Sun, 15 Nov 2015 19:22:49 +0530 Subject: [sbopkg-users] opencv 3.0.0 compile error In-Reply-To: <56485D31.2070205@sbopkg.org> References: <20151114111742.6e17cbc8@gmail.com> <56475F99.1070002@sbopkg.org> <20151115092845.0ba8358c@gmail.com> <56485D31.2070205@sbopkg.org> Message-ID: <20151115192249.36451b47@gmail.com> On Sun, 15 Nov 2015 17:23:45 +0700 Willy Sudiarto Raharjo wrote: > i would recompile opencv again after ffmpeg is being rebuilt > opencv <-> ffmpeg is a circular dependency > > or even better, recompile all digikam's dependency using sqg -p > digikam; sbopkg -i digikam thanks Willy, i recompiled/reinstalled all the dependencies but digikam still throws the same error. regards, subash From willysr at sbopkg.org Sun Nov 15 13:55:52 2015 From: willysr at sbopkg.org (Willy Sudiarto Raharjo) Date: Sun, 15 Nov 2015 20:55:52 +0700 Subject: [sbopkg-users] opencv 3.0.0 compile error In-Reply-To: <20151115192249.36451b47@gmail.com> References: <20151114111742.6e17cbc8@gmail.com> <56475F99.1070002@sbopkg.org> <20151115092845.0ba8358c@gmail.com> <56485D31.2070205@sbopkg.org> <20151115192249.36451b47@gmail.com> Message-ID: <56488EE8.4070002@sbopkg.org> > thanks Willy, i recompiled/reinstalled all the dependencies but digikam > still throws the same error. Do you have qt5 or digikam package installed before building? -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: From wedinm at gmail.com Sat Nov 21 19:18:47 2015 From: wedinm at gmail.com (M Wedin) Date: Sat, 21 Nov 2015 20:18:47 +0100 Subject: [sbopkg-users] Exit with mouse Message-ID: Hello! After a sync is complete, I'm asked to exit. Generally, the buttons work well with a mouse. But not that one. Is this a bug or design choice? Wed From wedinm at gmail.com Sat Nov 21 19:27:57 2015 From: wedinm at gmail.com (M Wedin) Date: Sat, 21 Nov 2015 20:27:57 +0100 Subject: [sbopkg-users] sbopkg in use from another machine Message-ID: I work on my machines from where I am at, at the moment. Sometimes, I have to leave a session running. Reaching the machine from another terminal, sbopkg exits with the PID to kill shown. Is it possible to add a question about having it killed on the spot instead? Wed From Bradley at NorthTech.US Sun Nov 22 00:25:38 2015 From: Bradley at NorthTech.US (Bradley D. Thornton) Date: Sat, 21 Nov 2015 16:25:38 -0800 Subject: [sbopkg-users] sbopkg in use from another machine In-Reply-To: References: Message-ID: <56510B82.9050703@NorthTech.US> On 11/21/2015 11:27 AM, M Wedin wrote: > I work on my machines from where I am at, at the moment. Yes, I gather this means that you are often working remotely. Perhaps it would be best in your case to always work remotely - even when you are at the local console. More about this later. > > Sometimes, I have to leave a session running. Reaching the machine > from another terminal, sbopkg exits with the PID to kill shown. Is it > possible to add a question about having it killed on the spot instead? I'm not sure that I completely understand what you are asking Wed, but you can set the flag to allow sbopkg to NOT enforce only a single process of itself, although there are caveats to note if you choose to do so. Better still, as a suggestion, would be to always run sbopkg remotely. i.e., since it appears that you're leaving it open most of the time the following would facilitate you using it without ever having to kill the process: $ tmux attach once you have a tmux (or screen, or Twin's twterm) session running, you can run sbopkg and just leave it. a ^b+d allows you to detach (optional from the local console, but you would certainly want to do this from any remote ssh connection) and you can also simultaneously connect to the the tmux session via any ssh session, or multiple ssh sessions all at the same time. I hope that helps, and also that I explained it adequately. Kindest regards, Bradley > > Wed > _______________________________________________ > sbopkg-users mailing list > sbopkg-users at sbopkg.org > http://sbopkg.org/mailman/listinfo/sbopkg-users --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From willysr at sbopkg.org Sun Nov 22 00:33:08 2015 From: willysr at sbopkg.org (Willy Sudiarto Raharjo) Date: Sun, 22 Nov 2015 07:33:08 +0700 Subject: [sbopkg-users] sbopkg in use from another machine In-Reply-To: <56510B82.9050703@NorthTech.US> References: <56510B82.9050703@NorthTech.US> Message-ID: <56510D44.3010604@sbopkg.org> > Better still, as a suggestion, would be to always run sbopkg remotely. > i.e., since it appears that you're leaving it open most of the time the > following would facilitate you using it without ever having to kill the > process: > > $ tmux attach > > once you have a tmux (or screen, or Twin's twterm) session running, you > can run sbopkg and just leave it. a ^b+d allows you to detach (optional > from the local console, but you would certainly want to do this from any > remote ssh connection) and you can also simultaneously connect to the > the tmux session via any ssh session, or multiple ssh sessions all at > the same time. AFAIK it should be ^a+d for screen yes, i often leave my session running sbo inside screen and when i need to continue, i just use screen -r or if it's still attached, you can force it using screen -rd -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: From willysr at sbopkg.org Sun Nov 22 09:56:24 2015 From: willysr at sbopkg.org (Willy Sudiarto Raharjo) Date: Sun, 22 Nov 2015 16:56:24 +0700 Subject: [sbopkg-users] Exit with mouse In-Reply-To: References: Message-ID: <56519148.9060302@sbopkg.org> > After a sync is complete, I'm asked to exit. Generally, the buttons > work well with a mouse. But not that one. Is this a bug or design > choice? Yes, it's a design choice We use a --tailbox parameter to the dialog since we are just looking at the output of the rsync process behind the scene in a loop. here's the relevant code while [[ -f $SYNC_LOCK ]]; do dialog --backtitle "Updating the active repository" \ --tailbox $SBOPKGOUTPUT 18 70 done -- Willy Sudiarto Raharjo -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 181 bytes Desc: OpenPGP digital signature URL: From subash.jeyan at gmail.com Sat Nov 14 05:40:21 2015 From: subash.jeyan at gmail.com (Subash) Date: Sat, 14 Nov 2015 05:40:21 -0000 Subject: [sbopkg-users] opencv 3.0.0 compile error Message-ID: <20151114111134.67bff7ea@gmail.com> hi, my name is subash, from chennai india. been on slackware since about 2003, on slackware-current now. just recently came across sbopkg and been using it for the last week or so. looks like a nice way to browse and install libraries/applications. thanks. i had opencv 2.4.x on my system but since the latest digikam needed opencv-3.0.0, was trying to compile that using sbopkg and i run into the following error: /usr/lib/gcc/i586-slackware-linux/4.9.3/../../../../i586-slackware-linux/bin/ld: warning: libhogweed.so.2, needed by /usr/lib/libavformat.so.56, not found (try using -rpath or -rpath-link) /usr/lib/gcc/i586-slackware-linux/4.9.3/../../../../i586-slackware-linux/bin/ld: warning: libgnutls.so.28, needed by /usr/lib/libavformat.so.56, not found (try using -rpath or -rpath-link) /usr/lib/libavformat.so.56: undefined reference to `gnutls_server_name_set at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_transport_set_ptr at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_record_recv at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_deinit at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_x509_system_trust at GNUTLS_3_0_0' /usr/lib/libavformat.so.56: undefined reference to `gnutls_global_deinit at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_handshake at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_x509_key_file at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_x509_trust_file at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_type_get at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_set_verify_flags at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_allocate_credentials at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_check_hostname at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_priority_set_direct at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_init at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_get_peers at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_record_send at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_bye at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_record_get_direction at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_free_credentials at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_strerror at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_credentials_set at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_deinit at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_certificate_verify_peers2 at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_init at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_global_init at GNUTLS_1_4' /usr/lib/libavformat.so.56: undefined reference to `gnutls_x509_crt_import at GNUTLS_1_4' collect2: error: ld returned 1 exit status modules/core/CMakeFiles/opencv_perf_core.dir/build.make:806: recipe for target 'bin/opencv_perf_core' failed make[2]: *** [bin/opencv_perf_core] Error 1 make[2]: Leaving directory '/tmp/SBo/opencv-3.0.0/build' CMakeFiles/Makefile2:1873: recipe for target 'modules/core/CMakeFiles/opencv_perf_core.dir/all' failed make[1]: *** [modules/core/CMakeFiles/opencv_perf_core.dir/all] Error 2 make[1]: Leaving directory '/tmp/SBo/opencv-3.0.0/build' Makefile:149: recipe for target 'all' failed make: *** [all] Error 2 i do have the latest gnutls installed (compiled from source). any pointers will be helpful. thanks, subash